The most basic way to keep your concrete driveway or patio looking clean is to sweep it regularly. Aim to sweep at least once a week, and more often if needed. This will help to remove any dirt, leaves, or other debris that can accumulate on the surface.
Hose it down. In addition to sweeping, you should also hose down your concrete driveway or patio on a regular basis. This will help to remove any remaining dirt or debris, as well as any potential stains. Aim to hose down at least once a week, and more often if needed.
2. Seal cracks and joints.
Cracks and joints in your concrete can allow water to seep in and cause damage. To prevent this, it’s important to regularly check for cracks and seal them with a quality sealant.
3. Inspect for signs of damage.
Regularly inspecting your concrete driveway or patio for signs of damage is an important part of maintenance. If you notice any cracks, chips, or other damage, it’s important to repair them as soon as possible to prevent further deterioration.
4. Keep plants and trees trimmed.
Plants and trees can cause damage to your concrete driveway or patio if they are not properly trimmed. Overhanging branches can scratch the surface, and roots can grow into cracks and joints. To prevent this, it’s important to keep plants and trees trimmed back from your concrete.
5. Remove any stains immediately.
Stains can quickly become permanent if they are not removed promptly. If you notice any stains on your concrete, it’s important to remove them as soon as possible using the appropriate cleaners and techniques.
6. Apply a sealant every few years.
Concrete sealers are made to reinforce the surface of concrete and extend its life. There are a few different types of sealers, all with different utilities. Acrylic/topcoat sealers protect the surface and usually change the appearance of the concrete. Penetrating sealants enter into the pores of the surface and structurally secure the concrete from within.
Applying a sealant to your concrete driveway or patio every 1-2 years or so can help to protect it from the elements and extend its lifespan. There are a variety of sealants available, so be sure to choose one that is compatible with your specific type of concrete.
Harsh chemicals can damage the surface of your concrete driveway or patio, so it’s important to avoid using them. If you need to use a chemical cleaner, be sure to choose one that is designed for use on concrete.
8. Do not use ice melt products.
As the temperature starts to drop, it’s important to take some precautions to make sure your concrete driveway or patio doesn’t get damaged. One of the most important things you can do is to avoid using deicing agents on your concrete.
Deicing agents like salt can damage your concrete by causing it to crack and crumble. The freezing and thawing process that takes place when you use these agents will cause the water on your concrete to freeze and thaw more frequently, which will eventually lead to cracks and other damage.
So, if you want to keep your concrete in good condition this winter, make sure you avoid using deicing agents. You can instead shovel snow off of your concrete surfaces as soon as it falls to prevent any damage from taking place.
9. Be careful when working in your driveway.
Exterior concrete maintenance is important to the longevity of your driveway. Be careful when working in your driveway with sharp tools as the metal blades can scrape or scratch the surface. Surface damage can lead to water damage, wherein water seeps through the concrete resulting in extensive damage to the structure.
10. Remove oil and grease stains quickly.
Oil and grease spills are common causes of concrete staining. If you have an oil or grease spill, it’s important to clean it up immediately. The longer the spill sits, the harder it will be to remove.
To remove an oil or grease stain:
Start by blotting up as much of the spill as possible with a paper towel or rag.
If the stain is fresh, you can try using dish soap and warm water to break down the oils. Scrub the area with a brush, then rinse away the soap with clean water.
If the stain is old or stubborn, you may need to use a degreaser or concrete cleaner specifically designed for removing oil stains. Follow the directions on the product label.
Once the stain is gone, rinse the area with clean water to remove any residue.
By taking quick action and using the right supplies, you can remove oil and grease stains from your concrete surfaces.
Exterior concrete maintenance is crucial in expanding the life of your driveway. Mold and mildew can quickly build up on concrete, causing deterioration over time. Power washing with a safe pressure and specialized cleaners is the best way to clean your driveway and keep it looking like new. Bel Air Softwash is a professional power washing company that can help you maintain your exterior concrete surfaces. Contact us today for a free estimate!
For more information about Bel Air Softwash or to get a free quote for house washing, roof cleaning, concrete cleaning, window cleaning services and more, visit our website https://www.belairsoftwash.com/ or call us at 410-847-7967. We strive to be the best pressure washing company in (Location). You can trust Bel Air Softwash to always provide satisfaction guaranteed pressure washing.
For all your exterior house cleaning needs, click here for a free quote!